Posters
Publications
Sigron, G. R., Britschgi, C. L., Gahl, B., & Thieringer, F. M. (2024). Insights into Orbital Symmetry: A Comprehensive Retrospective Study of 372 Computed Tomography Scans. Journal of Clinical Medicine, 13(4), 1041.
https://doi.org/10.3390/jcm13041041
Wang, K. C., Ryan, J. R., Chepelev, L., Wake, N., Quigley, E. P., Santiago, L., Wentworth, A., Alexander, A., Morris, J. M., Fleischmann, D., Ballard, D. H., Ravi, P., Hirsch, J. D., Sturgeon, G. M., Huang, Y., Decker, S. J., Von Windheim, N., Pugliese, R. S., Hidalgo, R. V., Patel P, Colon J, Thieringer FM, Rybicki, F. J. (2024). Demographics, utilization, workflow and outcomes based on observational data from the RSNA-ACR 3D Printing Registry. Journal of the American College of Radiology.
https://doi.org/10.1016/j.jacr.2024.07.019
Msallem, B., Veronesi, L., Beyer, M., Halbeisen, F. S., Maintz, M., Franke, A., Korn, P., Dragu, A., & Thieringer, F. M. (2024). Evaluation of the Dimensional Accuracy of Robot-Guided Laser Osteotomy in Reconstruction with Patient-Specific Implants—An Accuracy Study of Digital High-Tech Procedures. Journal of Clinical Medicine, 13(12), 3594.
https://doi.org/10.3390/jcm13123594
Thieringer, F. M., Leung, M. Y. Y., & Fan, K. (2024). Innovations and Insights in Facial Reconstruction: From gender affirmation to Trauma management. Craniomaxillofacial Trauma & Reconstruction, 17(2). https://doi.org/10.1177/19433875241249256
Guerra, R. C., De Fátima Borim Pulino, B., Júnior, V. F. S., Pereira, R. D. S., Thieringer, F. M., Sacco, R., Sader, R., & Vieira, E. H. (2023). Finite element analysis of low-profile reconstruction plates for atrophic mandibles: a comparison of novel 3D grid and conventional plate designs. Oral and Maxillofacial Surgery.
https://doi.org/10.1007/s10006-023-01173-3
Vivacqua, A., Fan, K., Gürtler, A., Thieringer, F. M., & Berg, B. (2024). An Algorithm for Jaw Pain among Divers. Journal of Clinical Medicine, 13(11), 3167.
https://doi.org/10.3390/jcm13113167
Westarp, E., Thieringer, F. M., & Roethlisberger, M. (2024). Virtual Surgical Planning and Customized CAD/CAM cranial implants: preoperative and intraoperative strategies for temporal intraosseous meningioma resection. Journal of Craniofacial Surgery, 35(3), e307–e309. https://doi.org/10.1097/scs.0000000000010095
Lobos, C. T., Benitez, B. K., Lill, Y., Kiser, L. E., Tache, A., Fernandez-Pose, M., Gonzalez, A. C., Nalabothu, P., Sharma, N., Thieringer, F. M., Díaz, A. V., & Mueller, A. A. (2024). Cleft lip and palate surgery simulator: Open source simulation model. Heliyon, 10(8), e29185. https://doi.org/10.1016/j.heliyon.2024.e29185
Maintz, M., Tourbier, C., De Wild, M., Cattin, P. C., Beyer, M., Seiler, D., Honigmann, P., Sharma, N., & Thieringer, F. M. (2024). Patient-specific implants made of 3D printed bioresorbable polymers at the point-of-care: material, technology, and scope of surgical application. 3D Printing in Medicine, 10(1). https://doi.org/10.1186/s41205-024-00207-0
Burger, T., Fan, K., Brokmeier, J., Thieringer, F. M., & Berg, B. (2024). Orbital Floor fractures: treatment and diagnostics – A survey among Swiss, German and Austrian maxillofacial units. Craniomaxillofacial Trauma & Reconstruction.
https://doi.org/10.1177/19433875241245498
Yoshikawa, O., Basoli, V., Boschetto, F., Rondinella, A., Lanzutti, A., Zhu, W., Greco, E., Thieringer, F. M., Xu, H., & Marin, E. (2024). Simple electrospinning method for biocompatible polycaprolactone Β-Carotene scaffolds: Advantages and limitations. Polymers, 16(10), 1371. https://doi.org/10.3390/polym16101371
Jakimiuk, A., Maintz, M., Müller-Gerbl, M., Thieringer, F. M., Keller, M., Guebeli, A., & Honigmann, P. (2024). 3D-printed Patient-Specific Implants made of Polylactide (PLDLLA) and β-Tricalcium Phosphate (β-TCP) for Corrective Osteotomies of The Distal Radius. Research Square (Research Square). https://doi.org/10.21203/rs.3.rs-4145453/v1
Keller, M., Thieringer, F.M., Honigmann, P. (2024). Artificial Intelligence in Musculoskeletal Medical Imaging. In: Schönbohm, A., von Horsten, H.H., Plugmann, P., von Stosch, M. (eds) Innovation in Life Sciences. Management for Professionals. Springer, Cham.
https://doi.org/10.1007/978-3-031-47768-3_9
Honigmann, P., Thieringer, F.M., Sharma, N., Keller, M. (2024). Patient-Specific Treatment in Hand Surgery: Smart Innovations and Rapid Translation into the Point of Care. In: Schönbohm, A., von Horsten, H.H., Plugmann, P., von Stosch, M. (eds) Innovation in Life Sciences. Management for Professionals. Springer, Cham.
https://doi.org/10.1007/978-3-031-47768-3_7
Han, X., Sharma, N., Xu, Z., Krajewski, S., Li, P., Spintzyk, S., Lv, L., Zhou, Y., Thieringer, F. M., & Rupp, F. (2024). A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating. Dental Materials, 40(4), 674–688.
https://doi.org/10.1016/j.dental.2024.02.011
Sabev, B., Abazi, S., Patcas, R., Hertig, G., Meyer, S., Rommers, N., Thieringer, F. M., & Metzler, P. (2024). Fully digital occlusion planning in orthognathic surgery – A crossover study. Journal of Cranio-Maxillofacial Surgery.
https://doi.org/10.1016/j.jcms.2024.03.007
Miazza, J., Winkel, D., Thieringer, F., Reuthebuch, O., Eckstein, F., Gahl, B., & Berdajs, D. (2024). Aortic root rotation morphological analysis of the aortic root with 3 dimensional computed tomography. European Journal of Cardio-Thoracic Surgery, 65(3).
https://doi.org/10.1093/ejcts/ezae040
Thieringer, F. M., Leung, M. Y., & Fan, K. (2024). Craniomaxillofacial Trauma and reconstruction in 2024: Navigating the Post-Pandemic world and advancing research through open access. Craniomaxillofacial Trauma & Reconstruction, 17(1), 3.
https://doi.org/10.1177/19433875241227056
Guebeli, A., Thieringer, F., Honigmann, P., & Keller, M. (2023). In-house 3D-printed custom splints for non-operative treatment of distal radial fractures: a randomized controlled trial. Journal of Hand Surgery (European Volume), 49(3), 350–358.
https://doi.org/10.1177/17531934231187554
Guerra, R., De Fatima Borim Pulino, B., Sader, R., Thieringer, F., & Hochuli-Vieira, E. (2024). COMPARATIVE STUDY IN ATROPHIC MANDIBLES BY FINITE ELEMENT ANALYSIS USING a LOW-PROFILE THREE-DIMENSIONAL GRID RECONSTRUCTIVE PLATE AND a 2.4 RECONSTRUCTION PLATE. International Journal of Oral and Maxillofacial Surgery, 52, 200–201. https://doi.org/10.1016/j.ijom.2023.10.557
Guerra, R., De Fatima Borim Pulino, B., De Macedo, T. O., Hammer, B., Sader, R., Millesi, G., Thieringer, F., & Hochuli-Vieira, E. (2024). SUCCESS ALGORITHM CASE SERIES FOR CHOOSING RECONSTRUCTION MATERIAL FOR MEDIAL WALL FRACTURES ASSOCIATED WITH ORBITAL FLOOR IN KEY AREA RECONSTRUCTION. International Journal of Oral and Maxillofacial Surgery, 52, 20.
https://doi.org/10.1016/j.ijom.2023.10.064
Thieringer, F. M., Leung, M. Y., & Fan, K. (2023). Resilience at the End of the Year: From Crisis to Innovation and the Future of Craniomaxillofacial Trauma and Reconstruction. Craniomaxillofacial Trauma & Reconstruction, 16(4), 1.
https://doi.org/10.1177/19433875231217130
Friedrich, P., Wolleb, J., Bieder, F., Thieringer, F. M., & Cattin, P. C. (2023). Point cloud diffusion models for automatic implant generation. Lecture Notes in Computer Science, 112–122. https://doi.org/10.1007/978-3-031-43996-4_11
Thieringer, F. M., Leung, S. M. Y., Kong, H., & Fan, K. (2023). Embracing Evolutions in Craniomaxillofacial Trauma and Reconstruction. Craniomaxillofacial Trauma & Reconstruction, 16(3), 165-166. https://doi.org/10.1177/19433875231205722
Westarp, E., Thieringer, F. M., & Roethlisberger, M. (2023). Precision Surgery for Orbital cavernous Hemangiomas: The Role of Three-Dimensional Printing in Individualized Resection—An Educational Experience. Journal of Craniofacial Surgery, 35(1), 220–222. https://doi.org/10.1097/scs.0000000000009640
Maintz, M., Msallem, B., De Wild, M., Seiler, D., Herrmann, S., Feiler, S., Sharma, N., Dalcanale, F., Cattin, P., & Thieringer, F. M. (2023). Parameter optimization in a finite element mandibular fracture fixation model using the design of experiments approach. Journal of the Mechanical Behavior of Biomedical Materials/Journal of Mechanical Behavior of Biomedical Materials, 144, 105948. https://doi.org/10.1016/j.jmbbm.2023.105948
Ileșan, R. R., Beyer, M., Kunz, C., & Thieringer, F. M. (2023). Comparison of Artificial Intelligence-Based applications for mandible segmentation: from established platforms to In-House-Developed software. Bioengineering, 10(5), 604.
https://doi.org/10.3390/bioengineering10050604
Singh, A., Khanal, N., Chaulagain, R., Sharma, N., & Thieringer, F. (2023). Is the Pre-Shaping of an Orbital Implant on a Patient-Specific 3D-Printed Model Advantageous Compared to Conventional Free-Hand Shaping? A Systematic Review and Meta-Analysis. Journal of Clinical Medicine, 12(10), 3426. https://doi.org/10.3390/jcm12103426
Tomooka, Y., Spothelfer D, Puiggali-Jou A, Tourbier C, Tankus EB, Thieringer FM, Cattin P, Rauter G, Eugster M. Minimally invasive in situ bioprinting using tube-based material transfer. Automatisierungstechnik, De Gruyter. 2023/4/28
Sommacal, A., Bingisser, R., Filippi, A., Bethke, M., Thieringer, F. M., Jaquiéry, C., & Berg, B. (2023). Dental and maxillofacial emergency algorithms in Swiss emergency departments. Journal of Clinical Medicine, 12(8), 2952.
https://doi.org/10.3390/jcm12082952
Modgill, V., Balas, B., Chi, M., Honigmann, P., Thieringer, F. M., & Sharma, N. (2023). Knowledge Domain and Innovation Trends Concerning Medical 3D Printing for Craniomaxillofacial Surgery Applications: A 30-Year Bibliometric and Visualized Analysis. Craniomaxillofacial Research & Innovation, 8, 275284642311709.
https://doi.org/10.1177/27528464231170964
Otaghsara, S. S. T., Joda, T., & Thieringer, F. M. (2023). Accuracy of dental implant placement using static versus dynamic computer-assisted implant surgery: An in vitro study. Journal of Dentistry, 132, 104487. https://doi.org/10.1016/j.jdent.2023.104487
Sharma, N., Zubizarreta-Oteiza, J., Tourbier, C., & Thieringer, F. M. (2023). Can steam sterilization affect the accuracy of Point-of-Care 3D printed polyetheretherketone (PEEK) customized cranial implants? An investigative analysis. Journal of Clinical Medicine, 12(7), 2495.
https://doi.org/10.3390/jcm12072495
Honigmann, P., Keller, M., Devaux-Voumard, N., Thieringer, F. M., & Sutter, D. (2022). Distance mapping in three-dimensional virtual surgical planning in hand, wrist and forearm surgery: a tool to avoid mistakes. International Journal of Computer Assisted Radiology and Surgery.
https://doi.org/10.1007/s11548-022-02779-w
Calderaro, S., Bausch, K., Tourbier, C., Wetterauer, C., Thieringer, F. M., & Berg, B. (2023). Medication-Related Osteonecrosis of the Jaw: A Cross-Sectional Survey among Urologists in Switzerland, Germany, and Austria. Journal of Clinical Medicine, 12(2), 638.
https://doi.org/10.3390/jcm12020638
Greuter, L., Croci, D., Frank, N., Thieringer, F., Licci, M., Cattin, P., Soleman, J., & Guzman, R. (2023). Multiuser 3D-Virtual Reality (SpectoVR) and 3D printed model: Two Effective Teaching Tools in Pediatric Neurosurgery. Brain and Spine, 3, 102333.
https://doi.org/10.1016/j.bas.2023.102333
Zarean, P., Malgaroli, P., Zarean, P., Seiler, D., De Wild, M., Thieringer, F. M., & Sharma, N. (2023). Effect of printing parameters on mechanical performance of Material-Extrusion 3D-Printed PEEK specimens at the Point-of-Care. Applied Sciences, 13(3), 1230.
https://doi.org/10.3390/app13031230
Keller, M., Guebeli, A., Thieringer, F., & Honigmann, P. (2023). Artificial intelligence in patient-specific hand surgery: a scoping review of literature. International Journal of Computer Assisted Radiology and Surgery, 18(8), 1393–1403.
https://doi.org/10.1007/s11548-023-02831-3
Wang, D., Han, X., Luo, F., Thieringer, F. M., Xu, Y., Ou, G., & Spintzyk, S. (2022). Adhesive property of 3D-Printed PEEK abutments: effects of surface treatment and temporary crown material on shear bond strength. Journal of Functional Biomaterials, 13(4), 288.
https://doi.org/10.3390/jfb13040288
Meyer, S., Benitez, B. K., Thieringer, F. M., & Mueller, A. A. (2023). Three-Dimensional printable Open-Source Cleft Lip and Palate Impression Trays: a Single-Impression workflow. Plastic & Reconstructive Surgery, 153(2), 462–465.
https://doi.org/10.1097/prs.0000000000010684
Reid, G., Gehweiler, J., Thieringer, F., Eckstein, F., Ferrari, E., Gahl, B., & Berdajs, D. A. (2023). Planning of graft size and 3D reconstruction using virtual reality technique in aortic valve reimplantation. Frontiers in Cardiovascular Medicine, 9.
https://doi.org/10.3389/fcvm.2022.1064617
Ostaș, D., Almășan, O., Ileșan, R. R., Andrei, V., Thieringer, F. M., Hedeșiu, M., & Rotar, H. (2022). Point-of-Care Virtual Surgical Planning and 3D Printing in Oral and Cranio-Maxillofacial Surgery: A Narrative review. Journal of Clinical Medicine, 11(22), 6625.
https://doi.org/10.3390/jcm11226625
Chi, M., Li, N., Sharma, N., Li, W., Chen, C., Dong, B., Cheng, L., Wang, L., & Thieringer, F. M. (2022). Positive regulation of osteogenesis on titanium surface by modification of nanosized Ca2+-exchanged EMT zeolites. Materials Today Communications, 33, 104874. https://doi.org/10.1016/j.mtcomm.2022.104874
Busch, S., Sharma, N., Cordier, D., & Thieringer, F. (2022). Evaluation of biomechanical properties of various alloplastic implant materials for the replacement of bony defects of the skull. Brain and Spine, 2, 101377.
https://doi.org/10.1016/j.bas.2022.101377
Thieringer, F.M., Honigmann, P., Sharma, N. (2022). Medical Additive Manufacturing in Surgery: Translating Innovation to the Point of Care. In: Ehsani, S., Glauner, P., Plugmann, P., Thieringer, F.M. (eds) The Future Circle of Healthcare. Future of Business and Finance. Springer, Cham. https://doi.org/10.1007/978-3-030-99838-7_20
Ehsani, S., Glauner, P., Plugmann, P., Thieringer, F.M. (2022). Introduction: Trends, Puzzles, and Hopes for the Future of Healthcare. In: Ehsani, S., Glauner, P., Plugmann, P., Thieringer, F.M. (eds) The Future Circle of Healthcare. Future of Business and Finance. Springer, Cham.
https://doi.org/10.1007/978-3-030-99838-7_1
Honigmann, P., Hofer, M., Hirsch, S., Morawska, M., Müller‐Gerbl, M., Thieringer, F. M., & Coppo, E. (2022). Cold ablation robot‐guided laser osteotomy in hand, wrist and forearm surgery—A feasibility study. International Journal of Medical Robotics and Computer Assisted Surgery, 18(5). https://doi.org/10.1002/rcs.2438
Maintz M, Seiler D, Thieringer F, Wild M. Topology-optimized patient-specific osteosynthesis plates: Methodology to semi-automatically design additive-manufactured osteosynthesis plates for the fixation of mandibular fractures. Current Directions in Biomedical Engineering. 2022;8(2): 177-180.
https://doi.org/10.1515/cdbme-2022-1046
Chi, M., Li, N., Cui, J., Karlin, S., Rohr, N., Sharma, N., & Thieringer, F. M. (2022). Biomimetic, mussel-inspired surface modification of 3D-printed biodegradable polylactic acid scaffolds with nano-hydroxyapatite for bone tissue engineering. Frontiers in Bioengineering and Biotechnology, 10. https://doi.org/10.3389/fbioe.2022.989729
Zarean, P., Zarean, P., Thieringer, F. M., Mueller, A. A., Kressmann, S., Erismann, M., Sharma, N., & Benitez, B. K. (2022). A Point-of-Care digital workflow for 3D printed passive presurgical orthopedic plates in Cleft care. Children, 9(8), 1261.
https://doi.org/10.3390/children9081261
Ehsani S, Glauner P, Plugmann P, Thieringer FM. The Future Circle of Healthcare: AI, 3D Printing, Longevity, Ethics, and Uncertainty Mitigation (Future of Business and Finance). 2022/8/17
Su, Y., Thieringer, F. M., Fernandes, R., & Parmar, S. (2022). Editorial: Virtual surgical planning and 3d printing in head and neck tumor resection and reconstruction. Frontiers in Oncology, 12. https://doi.org/10.3389/fonc.2022.960545
Han, X., Sharma, N., Spintzyk, S., Zhou, Y., Xu, Z., Thieringer, F. M., & Rupp, F. (2022). Tailoring the biologic responses of 3D printed PEEK medical implants by plasma functionalization. Dental Materials, 38(7), 1083–1098.
https://doi.org/10.1016/j.dental.2022.04.026
Wang, F., Wen, J., Cao, S., Yang, X., Yang, Z., Li, H., Meng, H., Thieringer, F. M., & Wei, J. (2022). Nomogram predicting long-term overall and cancer-specific survival of patients with buccal mucosa cancer. BMC Oral Health, 22(1).
https://doi.org/10.1186/s12903-022-02147-9
Murtezani, I., Sharma, N., & Thieringer, F. M. (2022). Medical 3D printing with a focus on Point-of-Care in Cranio- and Maxillofacial Surgery. A systematic review of literature. Annals of 3D Printed Medicine, 6, 100059.
https://doi.org/10.1016/j.stlm.2022.100059
Thieringer, F. M., Röthlisberger, E., Rüetschi, U., Figari, M., & Girod, S. (2022). Der AO CMF Online Campus – Erfahrungen mit onlinebasierten internationalen Fortbildungsveranstaltungen. OP-Journal, 38(01), 49–52.
https://doi.org/10.1055/a-1729-6560
Msallem, B., Maintz, M., Halbeisen, F. S., Meyer, S., Sigron, G. R., Sharma, N., Cao, S., & Thieringer, F. M. (2022). Biomechanical Evaluation of Patient-Specific Polymethylmethacrylate cranial implants for virtual surgical Planning: an In-Vitro Study. Materials, 15(5), 1970.
https://doi.org/10.3390/ma15051970
Wang, F., Tankus, E. B., Santarella, F., Rohr, N., Sharma, N., Märtin, S., Michalscheck, M., Maintz, M., Cao, S., & Thieringer, F. M. (2022). Fabrication and characterization of PCL/HA filament as a 3D printing material using thermal extrusion technology for bone tissue engineering. Polymers, 14(4), 669. https://doi.org/10.3390/polym14040669
Thieringer FM, Sharma N. Menschliche Ersatzteile aus dem 3-D-Drucker. Quintessenz Zahntechnik. 02/02/2022,188-189
Muff, J. L., Heye, T., Thieringer, F. M., & Brantner, P. (2022). Clinical acceptance of advanced visualization methods: a comparison study of 3D-print, virtual reality glasses, and 3D-display. 3D Printing in Medicine, 8(1).
https://doi.org/10.1186/s41205-022-00133-z
Ha, T. T., Thieringer, F. M., Bammerlin, M., & Cordier, D. (2022). High precision bone cutting by ER: YAG lasers might minimize the invasiveness of navigated brain biopsies. Frontiers in Oncology, 11. https://doi.org/10.3389/fonc.2021.690374
Murtezani, I., Sharma, N., & Thieringer, F. M. (2022). Medical 3D printing with a focus on Point-of-Care in Cranio- and Maxillofacial Surgery. A systematic review of literature. Annals of 3D Printed Medicine, 6, 100059.
https://doi.org/10.1016/j.stlm.2022.100059
Baumhoer, D., Berthold, R., Isfort, I., Heinst, L., Ameline, B., Grünewald, I., Thieringer, F. M., Rudack, C., Wardelmann, E., Vieth, V., Sperveslage, J., Trautmann, M., & Hartmann, W. (2022). Recurrent CTNNB1 mutations in craniofacial osteomas. Modern Pathology, 35(4), 489–494.
https://doi.org/10.1038/s41379-021-00956-x
Ismail, T., Haumer, A., Lunger, A., Osinga, R., Kaempfen, A., Saxer, F., Wixmerten, A., Miot, S., Thieringer, F., Beinemann, J., Kunz, C., Jaquiéry, C., Weikert, T., Kaul, F., Scherberich, A., Schaefer, D. J., & Martin, I. (2021). Case report: Reconstruction of a large maxillary defect with an engineered, vascularized, prefabricated bone graft. Frontiers in Oncology, 11.
https://doi.org/10.3389/fonc.2021.775136
Kaufmann, R., Zech, C. J., Takes, M., Brantner, P., Thieringer, F., Deutschmann, M., Hergan, K., Scharinger, B., Hecht, S., Rezar, R., Wernly, B., & Meissnitzer, M. (2022). Vascular 3D Printing with a Novel Biological Tissue Mimicking Resin for Patient-Specific Procedure Simulations in Interventional Radiology: a Feasibility Study. Journal of Digital Imaging, 35(1), 9–20.
https://doi.org/10.1007/s10278-021-00553-z
Wegmüller, L., Halbeisen, F., Sharma, N., Kühl, S., & Thieringer, F. M. (2021). Consumer vs. High-End 3D Printers for Guided Implant Surgery—An In Vitro Accuracy Assessment Study of Different 3D Printing Technologies. Journal of Clinical Medicine, 10(21), 4894.
https://doi.org/10.3390/jcm10214894
Bieger, V., Thieringer, F. M., Fischer, J., & Rohr, N. (2023). Fibroblast behavior on conventionally processed, milled, and printed occlusal device materials with different surface treatments. Journal of Prosthetic Dentistry, 129(6), 939–945.
https://doi.org/10.1016/j.prosdent.2021.08.015
Sharma, N., Welker, D., Aghlmandi, S., Maintz, M., Zeilhofer, H., Honigmann, P., Seifert, T., & Thieringer, F. M. (2021). A Multi-Criteria assessment strategy for 3D Printed Porous polyetheretherketone (PEEK) Patient-Specific implants for orbital wall reconstruction. Journal of Clinical Medicine, 10(16), 3563. https://doi.org/10.3390/jcm10163563
Sigron, G. R., Barba, M., Chammartin, F., Msallem, B., Berg, B., & Thieringer, F. M. (2021). Functional and Cosmetic Outcome after Reconstruction of Isolated, Unilateral Orbital Floor Fractures (Blow-Out Fractures) with and without the Support of 3D-Printed Orbital Anatomical Models. Journal of Clinical Medicine, 10(16), 3509.
https://doi.org/10.3390/jcm10163509
Sharma, N., Aghlmandi, S., Dalcanale, F., Seiler, D., Zeilhofer, H., Honigmann, P., & Thieringer, F. M. (2021). Quantitative assessment of Point-of-Care 3D-Printed Patient-Specific Polyetheretherketone (PEEK) cranial implants. International Journal of Molecular Sciences, 22(16), 8521. https://doi.org/10.3390/ijms22168521
Zhao, D., Ren, B., Wang, H., Zhang, X., Yu, M., Cheng, L., Sang, Y., Cao, S., Thieringer, F. M., Zhang, D., Wan, Y., & Liu, C. (2021). 3D-printed titanium implant combined with interleukin 4 regulates ordered macrophage polarization to promote bone regeneration and angiogenesis. Bone and Joint Research, 10(7), 411–424.
https://doi.org/10.1302/2046-3758.107.bjr-2020-0334.r4
Honigmann, P., Sharma, N., Brantner, P., Thieringer, F.M., Haefeli, M., (2021) 3D modeling in hand surgery – a comparison of data quality from multi sliced CT (MSCT) and cone beam (CBCT) using different software. International Journal of Computer Assisted Radiology and Surgery 16 (1), 95-96
Maintz, M., Hermann, S., Sharma, N., Thieringer, F.M., (2021). Finite element model validation for the presurgical treatment planning of mandibular angle fractures. International Journal of Computer Assisted Radiology and Surgery 16 (1), 91-93.
O’Connor, R. C., Abazi, S., Soleman, J., & Thieringer, F. M. (2021). Reconstruction of a combined frontal bone and orbital roof defect with associated meningoencephalocele using 3D modeling and 3D navigation. Craniomaxillofacial Trauma & Reconstruction Open, 6, 247275122110233. https://doi.org/10.1177/24727512211023340
Basgul, C., Thieringer, F. M., & Kurtz, S. M. (2021). Heat transfer-based non-isothermal healing model for the interfacial bonding strength of fused filament fabricated polyetheretherketone. Additive Manufacturing, 46, 102097.
https://doi.org/10.1016/j.addma.2021.102097
Basgul, C., Spece, H., Sharma, N., Thieringer, F. M., & Kurtz, S. M. (2021). Structure, properties, and bioactivity of 3D printed PAEKs for implant applications: A systematic review. Journal of Biomedical Materials Research Part B Applied Biomaterials, 109(11), 1924–1941. https://doi.org/10.1002/jbm.b.34845
Sharma, N., Ostas, D., Rotar, H., Brantner, P., & Thieringer, F. M. (2021). Design and additive manufacturing of a biomimetic customized cranial implant based on Voronoi diagram. Frontiers in Physiology, 12.
https://doi.org/10.3389/fphys.2021.647923
Frank, N., Beinemann, J., Thieringer, F. M., Benitez, B. K., Kunz, C., Guzman, R., & Soleman, J. (2021). The need for overcorrection: evaluation of computer-assisted, virtually planned, fronto-orbital advancement using postoperative 3D photography. Neurosurgical FOCUS, 50(4), E5. https://doi.org/10.3171/2021.1.focus201026
Keller, M., Guebeli, A., Thieringer, F., & Honigmann, P. (2021). In-hospital professional production of patient-specific 3D-printed devices for hand and wrist rehabilitation. Hand Surgery & Rehabilitation, 40(2), 126–133.
https://doi.org/10.1016/j.hansur.2020.10.016
Keller, M., Guebeli, A., Thieringer, F., & Honigmann, P. (2021). Overview of In-Hospital 3D printing and practical applications in hand surgery. BioMed Research International, 2021, 1–14. https://doi.org/10.1155/2021/4650245
Honigmann, P., Sharma, N., Schumacher, R., Rueegg, J., Haefeli, M., & Thieringer, F. (2021). In-Hospital 3D printed scaphoid prosthesis using Medical-Grade Polyetheretherketone (PEEK) biomaterial. BioMed Research International, 2021, 1–7.
https://doi.org/10.1155/2021/1301028
Thieringer, F.M., Zarean, P., Zarean, P., Abazi, S., Joda, T., (2021). Navigated digital implantology Possibilities and limitations of innovative technologies. Implantologie, 29(3), 269-284.
Thieringer, F. M., Cede, J., Glatz, K., Roehling, S., Stoeckle, M., & Leiggener, C. S. (2021). Oral Kaposi’s Sarcoma: A case report and Literature Review on Treatment management. Craniomaxillofacial Trauma & Reconstruction Open, 6, 247275122110363.
https://doi.org/10.1177/24727512211036328
Schön, S. N., Skalicky, N., Sharma, N., Zumofen, D. W., & Thieringer, F. M. (2021). 3D-Printer-Assisted Patient-Specific Polymethyl Methacrylate Cranioplasty: a case series of 16 consecutive patients. World Neurosurgery, 148, e356–e362.
https://doi.org/10.1016/j.wneu.2020.12.138
Meyer, S., Hirsch, J., Leiggener, C. S., Msallem, B., Sigron, G. R., Kunz, C., & Thieringer, F. M. (2020). Fibula Graft Cutting Devices: Are 3D-Printed Cutting Guides More Precise than a Universal, Reusable Osteotomy Jig? Journal of Clinical Medicine, 9(12), 4119.
https://doi.org/10.3390/jcm9124119
Berli, C., Thieringer, F. M., Sharma, N., Müller, J. A., Dedem, P., Fischer, J., & Rohr, N. (2020). Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices. Journal of Prosthetic Dentistry, 124(6), 780–786.
https://doi.org/10.1016/j.prosdent.2019.10.024
Seifert, L. B., Schnurr, B., Herrera‐Vizcaino, C., Begic, A., Thieringer, F., Schwarz, F., & Sader, R. (2020). 3D printed patient individualised models versus cadaveric models in an undergraduate oral and maxillofacial surgery curriculum: Comparison of students’ perceptions. European Journal of Dental Education, 24(4), 809–810.
https://doi.org/10.1111/eje.12550
Naik, J. M., Thieringer, F. M., Beck-Broichsitter, B., Girod, S., & Naik, M. N. (2020). Shoot and post: the making of educational videos. Craniomaxillofacial Trauma & Reconstruction Open, 5, 247275122096616. https://doi.org/10.1177/2472751220966160
Sharma, N., Honigmann, P., Cao, S., & Thieringer, F. (2020). Dimensional characteristics of FDM 3D printed PEEK implant for craniofacial reconstructions. Transactions on Additive Manufacturing Meets Medicine, 2(1).
https://doi.org/10.18416/ammm.2020.2009011
Sharma, N., Welker, D., Cao, S., von Netzer, B., Honigmann, P., Thieringer, F. (2021). An Interactive, Fully Digital Design Workflow for a Custom 3D Printed Facial Protection Orthosis (Face Mask). In: Meboldt, M., Klahn, C. (eds) Industrializing Additive Manufacturing. AMPA 2020. Springer, Cham. https://doi.org/10.1007/978-3-030-54334-1_3
Sharma, N., Aghlmandi, S., Cao, S., Kunz, C., Honigmann, P., & Thieringer, F. M. (2020). Quality characteristics and clinical relevance of In-House 3D-Printed Customized Polyetheretherketone (PEEK) implants for craniofacial reconstruction. Journal of Clinical Medicine, 9(9), 2818. https://doi.org/10.3390/jcm9092818
Emara, A., Sharma, N., Halbeisen, F. S., Msallem, B., & Thieringer, F. M. (2020). Comparative evaluation of digitization of diagnostic dental cast (Plaster) models using different scanning technologies. Dentistry Journal, 8(3), 79.
https://doi.org/10.3390/dj8030079
Cao, S., Han, J., Sharma, N., Msallem, B., Jeong, W., Son, J., Kunz, C., Kang, H., & Thieringer, F. M. (2020). In vitro mechanical and biological properties of 3D printed polymer composite and Β-Tricalcium phosphate scaffold on human dental pulp stem cells. Materials, 13(14), 3057. https://doi.org/10.3390/ma13143057
Sigron, G. R., Rüedi, N., Chammartin, F., Meyer, S., Msallem, B., Kunz, C., & Thieringer, F. M. (2020). Three-Dimensional Analysis of Isolated Orbital Floor Fractures Pre- and Post-Reconstruction with Standard Titanium Meshes and “Hybrid” Patient-Specific Implants. Journal of Clinical Medicine, 9(5), 1579.
https://doi.org/10.3390/jcm9051579
Sharma, N., Cao, S., Msallem, B., Kunz, C., Brantner, P., Honigmann, P., & Thieringer, F. M. (2020). Effects of steam sterilization on 3D printed Biocompatible Resin Materials for Surgical Guides—An Accuracy Assessment Study. Journal of Clinical Medicine, 9(5), 1506.
https://doi.org/10.3390/jcm9051506
Ebel, F., Thieringer, F. M., Kunz, C., Klein-Franke, A., Scheinemann, K., Guzman, R., & Soleman, J. (2020). Melanotic neuroectodermal tumor of infancy to the skull: case-based review. Child S Nervous System, 36(4), 679–688.
https://doi.org/10.1007/s00381-020-04509-6
Hirsch, JM., Palmquist, A., Rännar, LE., Thieringer, F.M. (2020). Additive Manufacturing and 3D Printing. In: Stübinger, S., Klämpfl, F., Schmidt, M., Zeilhofer, HF. (eds) Lasers in Oral and Maxillofacial Surgery. Springer, Cham.
https://doi.org/10.1007/978-3-030-29604-9_17
Chamo, D., Msallem, B., Sharma, N., Aghlmandi, S., Kunz, C., & Thieringer, F. M. (2020). Accuracy assessment of molded, Patient-Specific polymethylmethacrylate craniofacial implants compared to their 3D printed originals. Journal of Clinical Medicine, 9(3), 832.
https://doi.org/10.3390/jcm9030832
Guerra, R. C., De Azambuja Carvalho, P. H., Thieringer, F. M., Pereira, R. S., & Hochuli-Vieira, E. (2020). Recurrence of ameloblastic Fibro-Odontoma in a child: a case report. Craniomaxillofacial Trauma & Reconstruction Open, 5, 247275122090484.
https://doi.org/10.1177/2472751220904846
Msallem, B., Sharma, N., Cao, S., Halbeisen, F. S., Zeilhofer, H., & Thieringer, F. M. (2020). Evaluation of the dimensional accuracy of 3D-Printed Anatomical Mandibular models using FFF, SLA, SLS, MJ, and BJ Printing technology. Journal of Clinical Medicine, 9(3), 817.
https://doi.org/10.3390/jcm9030817
Licci, M., Thieringer, F. M., Guzman, R., & Soleman, J. (2020). Development and validation of a synthetic 3D-printed simulator for training in neuroendoscopic ventricular lesion removal. Neurosurgical FOCUS, 48(3), E18.
https://doi.org/10.3171/2019.12.focus19841
Alt, K. W., Rodríguez, C. T., Nicklisch, N., Roth, D., Nagy, A. S., Knipper, C., Lindauer, S., Held, P., De Lagrán, Í. G. M., Schulz, G., Schuerch, T., Thieringer, F., Brantner, P., Brandt, G., Israel, N., Magallón, H. A., Meyer, C., Mende, B. G., Enzmann, F., . . . Guerra, M. a. R. (2020). A massacre of early Neolithic farmers in the high Pyrenees at Els Trocs, Spain. Scientific Reports, 10(1). https://doi.org/10.1038/s41598-020-58483-9
Hatz, C., Msallem, B., Aghlmandi, S., Brantner, P., & Thieringer, F. (2020). Can an entry-level 3D printer create high-quality anatomical models? Accuracy assessment of mandibular models printed by a desktop 3D printer and a professional device. International Journal of Oral and Maxillofacial Surgery, 49(1), 143–148.
https://doi.org/10.1016/j.ijom.2019.03.962
Meyer, S., Hirsch, J., Leiggener, C. S., Zeilhofer, H., & Thieringer, F. M. (2020). A simple, effective, universal, and reusable osteotomy tool for jaw reconstructions with microvascular fibula transplants. Journal of Plastic Reconstructive & Aesthetic Surgery, 73(1), 98–102. https://doi.org/10.1016/j.bjps.2019.06.026
Msallem, B., Bassetti, S., Matter, M. S., & Thieringer, F. M. (2019). Strawberry gingivitis: Challenges in the diagnosis of granulomatosis with polyangiitis on gingival specimens. Oral Surgery Oral Medicine Oral Pathology and Oral Radiology, 128(6), e202–e207.
https://doi.org/10.1016/j.oooo.2019.07.015
Mittermiller, P. A., Bidwell, S. S., Thieringer, F. M., Cornelius, C., Trickey, A. W., Kontio, R., Girod, S., Dana, J., Florian, P., Jia, Q., Johanna, S., Karri, M., Moritz, B., Philipp, G., Stacey, M., Tommy, W., & Wenko, S. (2019). The Comprehensive AO CMF Classification System for Mandibular Fractures: A Multicenter Validation study. Craniomaxillofacial Trauma & Reconstruction, 12(4), 254–265. https://doi.org/10.1055/s-0038-1677459
Berg, B., Flury, E., Thieringer, F. M., Augello, M., Savic, M., Schötzau, A., Kunz, C., & Goldblum, D. (2019). Retrobulbar haematoma in the era of anticoagulants. Injury, 50(10), 1641–1648. https://doi.org/10.1016/j.injury.2019.08.035
Han, X., Sharma, N., Xu, Z., Scheideler, L., Geis-Gerstorfer, J., Rupp, F., Thieringer, F. M., & Spintzyk, S. (2019). An in vitro study of osteoblast response on Fused-Filament Fabrication 3D printed PEEK for dental and Cranio-Maxillofacial implants. Journal of Clinical Medicine, 8(6), 771. https://doi.org/10.3390/jcm8060771
Guerra, R., Carvalho, P., Pereira, R., Thieringer, F., & Hochuli-Vieira, E. (2019). High energy facial trauma in an airplane crash survivor. International Journal of Oral and Maxillofacial Surgery, 48, 197–198. https://doi.org/10.1016/j.ijom.2019.03.610
Beiglboeck, F., Thieringer, F. M., Scherrer, G., & Mueller, A. A. (2019). 3D-printing for orthopedic treatment of infants with cleft lips and palate deformities. International Journal of Oral and Maxillofacial Surgery, 48, 5.
https://doi.org/10.1016/j.ijom.2019.03.583
Girod, S., Mittermiller, P., Bidwell, S., Thieringer, F., Cornelius, C., Trickey, A., Kontio, R., Bader, M., Goetz, P., Johns, D., Smolka, W., Mesimaki, K., Moon, S., Probst, F., Qiiao, J., Snall, J., Wilkmann, T., & Girod, S. (2019). The comprehensive AO CMF classification system for mandibular fractures: a multicenter validation study. International Journal of Oral and Maxillofacial Surgery, 48, 31–32. https://doi.org/10.1016/j.ijom.2019.03.094
Oranges, C. M., Madduri, S., Brantner, P., Msallem, B., Giordano, S., Benitez, B., Kalbermatten, D. F., Schaefer, D. J., & Thieringer, F. M. (2019). Three-dimensional assessment of the breast: validation of a novel, simple and inexpensive scanning process. In Vivo, 33(3), 839–842. https://doi.org/10.21873/invivo.11548
Seifert, L. B., Hoefer, S. H., Flammiger, S., Rüsseler, M., Thieringer, F., Ehrenfeld, M., & Sader, R. (2018). A nationwide survey of undergraduate training in oral and maxillofacial surgery. Oral and Maxillofacial Surgery, 22(3), 289–296.
https://doi.org/10.1007/s10006-018-0703-0
Werz, S. M., Zeichner, S. J., Berg, B., Zeilhofer, H., & Thieringer, F. (2018). 3D Printed Surgical Simulation Models as educational tool by maxillofacial surgeons. European Journal of Dental Education, 22(3).
https://doi.org/10.1111/eje.12332
Sommacal, B., Savic, M., Filippi, A., Kühl, S., & Thieringer, F. (2018). Evaluation of two 3D printers for guided implant surgery. The International Journal of Oral & Maxillofacial Implants, 33(4), 743–746. https://doi.org/10.11607/jomi.6074
Schön, S., & Thieringer, F. (2018). Do-It-Yourself Cranioplasty—3D printers help to reduce costs and enhance cosmetic results of cranioplasty. Journal of Neurological Surgery Part a Central European Neurosurgery.
https://doi.org/10.1055/s-0038-1660718
Honigmann, P., Schumacher, R., Marek, R., Büttner, F., Thieringer, F., & Haefeli, M. (2018). A three-dimensional printed patient-specific scaphoid replacement: a cadaveric study. Journal of Hand Surgery (European Volume), 43(4), 407–412.
https://doi.org/10.1177/1753193418757634
Oranges, C. M., Thieringer, F. M., Kalbermatten, D. F., Haug, M., & Schaefer, D. J. (2018). The evolution of photography and Three-Dimensional imaging in plastic surgery. Plastic & Reconstructive Surgery, 141(1), 196e–197e.
https://doi.org/10.1097/prs.0000000000004005
Honigmann, P., Sharma, N., Okolo, B., Popp, U., Msallem, B., & Thieringer, F. M. (2018). Patient-Specific surgical implants made of 3D printed PEEK: material, technology, and scope of surgical application. BioMed Research International, 2018, 1–8.
https://doi.org/10.1155/2018/4520636
Thieringer, F.M., Sharma, N., Mootien, A., Schumacher, R., Honigmann, P. (2018). Patient Specific Implants from a 3D Printer – An Innovative Manufacturing Process for Custom PEEK Implants in Cranio-Maxillofacial Surgery. In: Meboldt, M., Klahn, C. (eds) Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017. AMPA 2017. Springer, Cham. https://doi.org/10.1007/978-3-319-66866-6_29